Category: CCNA 1 Labs – Packet Tracer
2.4.1.2 Packet Tracer – Skills Integration Challenge (Instructor Version) Packet Tracer – Skills Integration Challenge Addressing Table Objectives · Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI). · Use Cisco IOS commands to specify or limit access to …
2.7.6 Packet Tracer – Implement Basic Connectivity (Instructions Answers) Addressing Table Device Interface IP Address Subnet Mask S1 VLAN 1 192.168.1.253 255.255.255.0 S2 VLAN 1 192.168.1.254 255.255.255.0 PC1 NIC 192.168.1.1 255.255.255.0 PC2 NIC 192.168.1.2 255.255.255.0 Part 1: Perform a Basic Configuration on S1 and S2 Part 2: Configure …
2.5.5 Packet Tracer – Configure Initial Switch Settings Instructor Version Objectives Part 1: Verify the Default Switch Configuration Part 2: Configure a Basic Switch Configuration Part 3: Configure a MOTD Banner Part 4: Save Configuration Files to NVRAM Part 5: Configure Background In this activity, you will perform …
2.3.7 Packet Tracer – Navigating the IOS (Instructor Version – Optional Packet Tracer) Instructor Note: Red font color or green highlights indicate text that appears in the instructor copy only. Topology Objectives Part 1: Basic Connections, Accessing the CLI and Exploring Help Part 2: Exploring EXEC Modes Part …
Representing the Network Instructions Answers All clients have full connectivity to the servers. For the sake of frame diversity, the environment is not entirely realistic. For instance: – NAT and PAT overload are both used on the Branch network, but the Central 10.X.X.X network is shared publicly. – …