Category: CCNPv8 ENCOR
CCNPv8 ENCOR (Version 8.0) – CCNP ENCOR 8 Final Exam 1. What is the IPv6 address used by OSPFv3 non-DR/BDR routers to send link-state updates and link-state acknowledgments? FF02::2 FF02::5 FF02::6 FF02::9 2. Refer to the exhibit. Both routers R1 and R2 are configured for OSPFv3 and are …
CCNP ENCOR v8 Hands On Skills Exam Answers ENCOR Skills Assessment Topology Addressing Table Device Interface IPv4 Address IPv6 Address IPv6 Link-Local R1 G0/0/0 209.165.200.225/27 2001:db8:200::1/64 fe80::1:1 G0/0/1 10.0.10.1/24 2001:db8:100:1010::1/64 fe80::1:2 S0/1/0 10.0.13.1/24 2001:db8:100:1013::1/64 fe80::1:3 R2 G0/0/0 209.165.200.226/27 2001:db8:200::2/64 fe80::2:1 Loopback0 2.2.2.2/32 2001:db8:2222::1/128 fe80::2:3 R3 G0/0/1 10.0.11.1/24 2001:db8:100:1011::1/64 …
8.1.2 Lab – Implement Single-Area OSPFv2 (Answers) Topology Addressing Table Device Interface IPv4 Address R1 G0/0/1 10.10.0.1/29 Loopback0 209.165.200.225/27 Loopback1 192.168.1.1/26 D1 G1/0/5 10.10.0.2/29 G1/0/23 10.10.8.1/24 G1/0/24 10.10.9.1/24 D2 G1/0/5 10.10.0.3/29 G1/0/23 10.10.24.1/24 G1/0/24 10.10.25.1/24 PC1 NIC 10.10.8.10/24 PC2 NIC 10.10.9.10/24 PC3 NIC 10.10.24.10/24 PC4 NIC 10.10.25.10/24 Objectives …
6.1.3 Lab – Implement VRF-Lite (Answers) Topology Addressing Table Device Interface IPv4 Address IPv6 Address IPv6 Link-Local R1 G0/0/0 10.1.2.1/24 2001:db8:acad:1012::1/64 fe80::1:1 G0/0/1.5 10.1.2.1/24 2001:db8:acad:1012::1/64 fe80::1:2 G0/0/1.8 10.1.3.1/24 2001:db8:acad:1013::1/64 fe80::1:4 S0/1/0 10.1.3.1/25 2001:db8:acad:1013::1/64 fe80::1:2 R2 G0/0/0 10.2.3.2/24 2001:db8:acad:1023::2/64 fe80::2:1 Loopback0 192.168.2.1/24 2001:db8:acad:2000::1/64 fe80::2:2 R3 S0/1/0 10.1.3.3/25 2001:db8:acad:1013::3/64 fe80::3:1 …
6.1.2 Lab – Investigate Static Routes (Answers) Topology Addressing Table Device Interface IPv4 Address IPv6 Address IPv6 Link-Local R1 G0/0/0 10.1.2.1/24 2001:db8:acad:1012::1/64 fe80::1:1 S0/1/0 10.1.3.1/25 2001:db8:acad:1013::1/64 fe80::1:2 S0/1/1 10.1.3.129/25 2001:db8:acad:1014::1/64 fe80::1:3 Loopback0 192.168.1.1/27 2001:db8:acad:1000::1/64 fe80::1:4 R2 G0/0/0 10.1.2.2/24 2001:db8:acad:1012::2/64 fe80::2:1 G0/0/1 10.2.3.2/24 2001:db8:acad:1023::2/64 fe80::2:2 Loopback0 192.168.2.1/27 2001:db8:acad:2000::1/64 fe80::2:3 …
5.1.4 Lab – Tuning EtherChannel (Answers) Topology Objectives Part 1: Build the Network and Configure Basic Device Settings Part 2: Tune LACP-based EtherChannels Part 3: Explore EtherChannel Load Balancing Background / Scenario The open standard Link Aggregation Control Protocol (LACP) is extremely flexible and offers robust options for …
5.1.3 Lab – Implement EtherChannel (Answers) Topology Objectives Part 1: Build the Network and Explore Dynamic Trunking Protocol Part 2: Configure Basic Device Settings Part 3: Configure Static EtherChannel Part 4: Implement EtherChannel Using PAgP Part 5: Implement EtherChannel Using LACP Background / Scenario Our topology includes several …
5.1.2 Lab – Implement VTP (Answers) Topology Objectives Part 1: Build the Network, Configure Basic Device Settings and Interface Addressing Part 2: Implement and Observe a VTPv2 Domain Part 3: Implement and Observe a VTPv3 Domain Background / Scenario VLAN Trunking Protocol (VTP) is a technology that manages …
4.1.2 Lab – Implement MST (Answers) Topology Objectives Part 1: Build the Network and Configure Basic Device Settings and Interface Addressing Part 2: Implement and Observe MST Part 3: Configure, Tune and Verify Basic MST Operation Background / Scenario Cisco’s Per VLAN Spanning Tree (PVST+) provides a significant …
3.1.2 Lab – Implement Advanced STP Modifications and Mechanisms (Answers) Topology Addressing Table Device Interface IP Address D1 VLAN 1 10.0.0.1/8 D2 VLAN 1 10.0.0.2/8 A1 VLAN 1 10.0.0.3/8 Objectives Part 1: Build the Network and Configure Basic Device Settings and Interface Addressing Part 2: Implement and Observe …
