8.1.4.3 Lab – Remote Assistance in Windows (Answers) Introduction In this lab, you will remotely connect to a computer, examine device drivers, and provide remote assistance. Recommended Equipment Two Windows 7, Windows 8, or Vista computers connected to a LAN. The two computers must be part of the …
8.1.3.9 Lab – Share Resources in Windows (Answers) Introduction In this lab, you will create and share a folder, set permissions for the shares, create a Homegroup and a Workgroup to share resources, and map a network drive. Due to Windows Vista lack of Homegroup support, networks running …
8.1.2.14 Lab – Test the Wireless NIC in Windows (Answers) Introduction In this lab, you will check the status of your wireless connection, investigate the availability of wireless networks, and test connectivity. Recommended Equipment A computer running Windows A wireless NIC installed An Ethernet NIC installed A wireless …
8.1.2.12 Lab – Configure Wireless Router in Windows (Answers) Introduction In this lab, you will configure and test the wireless settings on a wireless router. Recommended Equipment A computer with Windows installed A Wireless NIC installed An Ethernet NIC installed A wireless Router Ethernet patch cable Note: All …
8.1.2.10 Lab – Connect to a Router for the First Time (Answers) Introduction In this lab, you will configure basic settings on a wireless router. Recommended Equipment A computer with Windows installed An Ethernet NIC installed Wireless router Ethernet patch cable Answers Note: You will need to provide …
7.4.1.11 Lab – Configure a NIC to Use DHCP in Windows (Answers) Introduction In this lab, you will configure an Ethernet NIC to use DHCP to obtain an IP address and test connectivity between two computers. Recommended Equipment Wireless router Two computers running Windows Ethernet patch cables (straight-through …
7.3.2.6 Lab – Build and Test Network Cables (Answers) Introduction In this lab, you will build and test straight-through and crossover Unshielded Twisted-Pair (UTP) Ethernet network cables. Note: With a straight-through cable, the color of wire used by pin 1 on one end is the same color used …
6.3.1.7 Lab – System Restore in Windows 8 (Answers) Introduction In this lab, you will create a restore point and use it to restore your computer. Recommended Equipment A computer running Windows 8 Step 1: Create a restore point. a. Click Control Panel > Recovery b. Select Configure …
6.3.1.7 Lab – System Restore in Windows 7 and Vista (Answers) Introduction In this lab, you will create a restore point and then use it to restore your computer. Recommended Equipment A computer running Windows 7 or Vista Step 1: Create a restore point. a. Click Control Panel …