IT Questions Bank

IT Questions Bank 1

An organization requires that LAN clients generate their IPv6 configuration using SLAAC. You have configured the IPv6 GUA on the router LAN interface and verified that the interface is UP. However, hosts are not generating an IPv6 GUA. Which other command should be configured to enable SLAAC?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
A network administrator is implementing DHCPv6 for the company. The administrator configures a router to send RA messages with M flag as 1 by using the ipv6 nd managed-config-flag interface command, and the A flag is set to 0 using the ipv6 nd prefix default no-autoconfig command. What effect will this configuration have on the operation of the clients?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
An administrator wants to configure hosts to automatically assign IPv6 addresses to themselves by the use of Router Advertisement messages, but also to obtain the DNS server address from a DHCPv6 server. Which address assignment method should be configured?
IT Questions Bank 2ITExamAnswers asked 4 years ago • 
A network administrator configures a router to send RA messages with the A flag and O flag set to 1. The M flag is set to 0. Which statement describes the effect of this configuration when a PC tries to configure its IPv6 address?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
Which DHCP operation statement is true?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
Which command issued on R1 can be used to verify the current IPv4 address and MAC address binding?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
What is accomplished by the ip dhcp excluded-address 10.10.4.1 10.10.4.5 command?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
Which Windows command combination would enable a DHCPv4 client to reinstate its IPv4 configuration?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
Which interface configuration command will enable the port to establish an EtherChannel only if it receives PAgP packets from the other switch?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
Which interface configuration command will enable the port to initiate an LACP EtherChannel?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
Which combination of channel-group modes will establish an EtherChannel?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
There has been an increase in network traffic between two Catalyst 2960 switches, and their FastEthernet trunk link has reached its capacity. How can traffic flow be improved?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
Which two statements regarding a PortFast enabled switch port are true? (Choose two.)
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
What is an advantage of using STP in a LAN?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
Which PVST+ feature ensures that configured switch edge ports do not cause Layer 2 loops if a port is mistakenly connected to another switch?
IT Questions Bank 2ITExamAnswers asked 2 years ago • 
« Previous1…421422423424425…1,320Next »
Ask Question