Cisco CCNA v3.0 (200-125) Study Guide – Exam Dumps VCE+PDF Latest

UPDATE 2020 ->> CCNA 200-301 DUMPS

The Cisco Certified Network Associate (CCNA) Routing and Switching composite exam (200-125) is a 90-minute, 60–70 question assessment that is associated with the CCNA Routing and Switching certification. This exam tests a candidate’s knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management. Candidates want to pass the exam successfully to prove their competence.

I will update this article frequently questions and answers of CCNA Cisco Certified Network Associate CCNA (v3.0) and bring you newest information about this exam.

[NEW] Lite version (~300 Questions):

CCNA 200-125 Exam Dump New Question 2020 – Lite Version 300Q
Download VCE & PDF file: https://drive.google.com/drive/folders/1b4gvkcYZIZ3tjmz2xntnVZOb50wuuea6?usp=sharing

[Recommended] Full version (~1000 Questions):

Sections (Theory) Questions & Answers Test Online
1. Network Fundamentals Sections 1 Sections 1
2. LAN Switching Technologies Sections 2 Sections 2
3. Routing Technologies Sections 3 Sections 3
4. WAN Technologies Sections 4 Sections 4
5. Infrastructure Services Sections 5 Sections 5
6. Infrastructure Security Sections 6 Sections 6
7. Infrastructure Management Sections 7 Sections 7
8. New Questions – Updating Sections 8 Sections 8
Labs Sim Access List Control (ACL-2)
Access List Control (ACL)
EIGRP Configuration
IPv6 Configuration
VLAN Troubleshooting
DHCP Troubleshooting
EIGRP GRE Troubleshooting
GRE Tunnel Troubleshooting
RIPv2 Troubleshooting
EIGRP Troubleshooting
OSPF Troubleshooting
IPv6 OSPF Sim
Drag & Drop Questions
Download VCE & PDF file: https://drive.google.com/drive/folders/1VjMQhHZevJlHGuo-iZ_JdU_1_NUc0FGw?usp=sharing
Changelog:
– 19 Feb 2020 | Fixed some answers
– 16 Feb 2020 | Fixed some answers
– 12 Feb 2020 | Fixed some answers
– 11 Feb 2020 | Fixed some answers
– 9 Feb 2020 Fixed some answers.
– 28 Jan 2020 Add new questions Q.VIII.257 – Q.VIII.264
– 3 Jan 2020 Add new questions + fix

The questions valid until February 24, 2020

From the comments here and information from other places, this article tries to summarize all the CCNA frequently asked questions and many tips that can help you save much time when sitting in the exam hall.
Please feel free to ask anything that you are unclear about CCNA so that all of us can help you. I will update this article frequently to bring you newest information about this exam.

We regularly synchronize Questions & Answers on this web site with vce and pdf (300Q and 1000Q) based only on well-documented feedbacks.

You keep track of the column “Last modified” in Google Drive link to download the most exactly pdf and vce file version.

Members have passed this exam recent

Nek – Passed on Feb 14, 2020

Hi all, just want to share to all of you that I passed the exam today with 9xx/1000. 300q and sim labs are so reliable. Trust all of the materials provided by itexamanswers admin. Thank you admin!


Azding – Passed on 29/01/2020

I passed 963/1000 on 29/01. All practice and all lab correct’re exam. I have exam ACL Mod4 and EIGRP GRE . It dump is correct answer Thank so much Admin team


ninejo – Passed on Feb 12, 2020

Hello everyone, PASSED today at first attempt with 9XX/1000 score. First of all i want to thank the admin of this site for keep every section in order (study material, and all sections), this is the best site by far over the whole web. And please keep doing this great work.
Now i want to share some help for those who are still studying to pass soon (there is time 23/02/2020):
Questions: Yes, q300 is enough and cover almost all questions (more than 90%).
Q300 alone is not enough to pass, you have to study and understand ALL the labs on the main section (around 12-15 labs). Labs on exam are almost identical.. almost, they change ip address and some troubleshooting requests.. so learn labs and learn how things work… this will save you from a mechanical and failure execution.
Dumps are precious resource if are used to keep you on track while studying. Who want to try to learn all dump question by memory-only will face much more difficulties (can still be done btw).
Another tips… my exam labs ACL-1, ACL-2, EIGRP GRE. The labs pool i notice change every few days… so if you have exam tomorrow most likely you will get the same labs… of course, no guaranteed since the pool change anytime.
P.S. i have been studying this course aorund one year and last 4-5weeks like crazy (something like 10hours a day). Good luck everyone !!

Temitayo – Passed on Feb 12, 2020

Hey guys, I passed my exam today, scored over 900. The 300Q is all you need for the exams. Thank you admin and everyone on this platform. I’m on to th next cert

adsw – Passed on Feb 11, 2020

Hello guys, today i passed the test with 9xx score. 300Q are enought and 95%+ from questions are from there.
I saw only 2 new questions and one of them was.I had 3 LABS – ACL 1 , ACL 2 and EIGRP over GRE

joe – Passed on Feb 11, 2020

hi all, passed the test today !!!!! 9XX very good score .

i studied the cisco press books for ccna 200-125 used only the 300+ question pdf
all was in the questions also spent alot of time on drag and drops and sims. All you need is in the 300 questions but you need to focus on the sims , and drag and drops i got acl2, eigrp sim,acl sim and ospf sim , about 4 drag and drops all are in the 300q and sims and DD on this site.

thanks for all the info also there are still a few questions on here that are wrong about 8 off them, make sure to verify the answers not just memorize !!!!!!!!!

Joe

odwight – Passed on Feb 10, 2020

just passed my exam. refer to my other post. cheers!

Josie – Passed on Feb 8, 2020

I really appreciate this website! I took the CCNA exam and passed. These questions and one of the Lab Sims were on it. I studied many different websites, not sure of which ones would be on it and this website was the only one that had the exact questions. Thank you!

Tahfeez – Passed on Feb 7, 2020

Thanks guys, today i passed my ccna 926 pts. i went through the 300 lite question. most of question is from 300. i never did 1000.
both acl and eigrp gre simlet i got plus last qu was only 1 drag n drop dhcp.

Nuikung – Passed on Feb 12, 2020

Yesterday I passed 895/1000. All practice and all lab correct’re exam I have exam ACL Mod4 as well as all sim would be grateful. It dump is correct answer Thank so much Admin team .^_^

and more than 650 other members….


Related Articles

727
Leave a Reply

avatar
268 Comment threads
460 Thread replies
57 Followers
 
Most reacted comment
Hottest comment thread
228 Comment authors
TemitayoBuddyAlexSharkJansi Recent comment authors
newest oldest most voted
Buddy
Guest
Buddy

Hello, not sure if you guys still visiting here. Does anyone know good site for AWS and Azure? Please let me know… thank you.

Alex
Guest
Alex

passed with score 963 on 23 Feb, including 3 laboratories (ACL 1 & 2 and dhcp) and a lot of questions from the 300Q document and some questions in the 1000q

I would like to thank all the admins of the site as well as everyone who has contributed to the correction of errors.

Shark
Guest
Shark

Passed with the Score 9XX on 23-Feb. Thanks for your Support 🙂

Jansi
Guest
Jansi

update for new CCNA 200-301

TJ1913
Guest
TJ1913

I want to thank you for this great page, I managed to pass the exam 3 days ago with a score higher than 930, including 3 laboratories and a lot of questions from the 300Q document. There were only about 3 new questions, I hope they continue helping more people and do more practices for the community. Greetings.

Buddy
Guest
Buddy

I am not sure why I am still visiting this site couple of times everyday 🤔

Temitayo
Guest
Temitayo

Because this site will end up becoming a community, our community

Hello
Guest
Hello

passed 930/1000 thanks for everything. had EIGRP GRE, ACL abd ACL2. Most questions came from 300. But had 4-5 questions that i had never seen before 😛

Buddy
Guest
Buddy

I wonder how’s the traffic on this site after 200-125 expires.

ninejo
Guest
ninejo

maybe not the peak of the last 3 weeks, will be good anyway i think, cause there is new version 200-301 now and lot of people are looking forward for resources. Here you can find a lot, not only dumps. So i wish good luck to the admin. And i hope he will open a forum also here, since community is growing everyday. This site can be a refer point. I hope to find here in next months more about certifications study resources, like other ccnp or some penetration testing certifications like oscp. Today is 24/02/2020. Good luck everyone for… Read more »

Buddy
Guest
Buddy

Guys… passed my exam. Just came out from exam, sitting in the car and posting this. Saw bunch of new questions.

I didn’t score 9xx but I have passed 😊

Travis, if your are read this, thanks for your help.

Adap
Guest
Adap

Hows the Lab?

Buddy
Guest
Buddy

ACL, ACL2 and DHCP

Gilles
Guest
Gilles

Hi guys, just to tell y’all that I passed my CCNA exam today with a score of 938/1000. All questions came from 300q and the Labs Sim were on ACL 1,2 and EGIRP. Thanks to Admin for this platform and all the comments that ensured me of the trustworthiness of the content on this page. Finally, if you are thinking of taking the exam soon, you are at the right website, trust the 300q and the Labs Sim provided then this exam will be the easiest of your life.

Temitayo
Guest
Temitayo

Hi everyone, as the we are rounding up on our certifications before the new releases, I want to thank the admin for creating this platform and making available all the materials here. I also want to thank everyone who have been contributing to the success of this platform. I hope that this platform grows to become a big community where we all interact and help each other grow in our chosen field of IT. I want to enjoin the admin to work towards modifying this page to allow for networking and greater collaboration among the users. I also hope this… Read more »

aamol
Guest
aamol

Guys,

Passed with 926.The provided 300q is more than enough.Would like to thanks Admin and people who are posting comments here and provide valuable feedback.Really appreciate.

Again Thanks to ADMIN.

Ali Mohsen
Guest
Ali Mohsen

914/1000, for anyone having the exam today, 300Q and LABs are more than enough to pass, they are identical so studying them will guarantee a pass

Maestyck
Guest
Maestyck

Passed, 930/1000. Guys 300q and labs are enough for pass.
Thx ADMIN TEAM!

Hopeful
Guest
Hopeful

Those sitting for the exam Saturday and Sunday, study what has been presented here and you will do fine. Thanks to everyone who assisted me….@Travis, I don’t think your thumbnail pic will exit my mind for a long time, hope you did well on your test. Special thanks to those running the site. When you have test questions so esoteric it takes up to 3 hours researching, parsing words, discussing with colleagues, only to come up with a best guess of what the answer is, then students need someone in their corner . Now, having successfully extended myself over this… Read more »

aamol
Guest
aamol

Hey…what labs and sim you had…and what about DD

Buddy
Guest
Buddy

Travis’s thumbnail is every where is see.. lol

Enrique
Guest
Enrique

Hi, I passed with score 890. 4 drag and drop, and one ACL, with different IP, but the some.

Many questions of q300, but any from q1000 or new

Shawn
Guest
Shawn

Hi everyone, I’ve passed the exam with 926 today. I can guarantee that you will pass the test with flying colours by just studying 300q and the labs sim here. Labs Sim I had: 1)ACL-2 mod 2 2)ACL 3)DHCP troubleshooting Questions I had but not included in 300q: 1)Q10 from 1000q 2)Q126 from 1000q 3)Q171 from 1000q 4)Not included in both 1000q and 300q, the question comes with a topology and the title is something as “Which path will Router A select to reach the destination?” (There are 3 paths, each router for the path is set with different protocol… Read more »

Deadprey
Guest
Deadprey

Were the questions about the labs similar ou do you have to search for the errors ?

Shawn
Guest
Shawn

they were almost 100% identical. just pay attention to the host no., ip address, and access group no. Good luck to you!

hughos
Guest
hughos

Thank you very much for this material! I have only one question.
Don’t you have also Practice Skills Exam Answers v7 or is it the same/similar to v5, 6?

Shawn
Guest
Shawn

Hi Hughos, this material is enough for the exam

networkier
Guest
networkier

Is question 90 on the 300 lite b or d ?

Deadprey
Guest
Deadprey

Hi Guys,

Anyone having their exam today ?
If yes please let me know just as you finish you exam please.

Ali Mohsen
Guest
Ali Mohsen

got the exam in 12hrs, will update when finished

Shawn
Guest
Shawn

i had my exam few hours ago. passed with 926 by just studying 300q and sims lab

Deadprey
Guest
Deadprey

Congratulations Shawn and thanks the the info 🙂

SWAT
Guest
SWAT

ust say a big thank you to the administrators of the site. you are doing a good job.
I passed the exam this morning with 9 ** / 1000.
the vce lite is super interesting. all the questions are there except 2 or 3 new questions.acl 1 and 2 and eigrp.
thanks again.

networkier
Guest
networkier

did you use the 300 or 1000 dump ?

Melba
Guest
Melba

Passed today (finally) labs 2 x acl and DHCP

Vanessa
Guest
Vanessa

Yesterday I passed my exam, 89x/1000
Labs: ACL, ACL 2, EIGRP GRE
D&D: DHCP
I only studied 100q file I thought was better but! a loooot of question was of 300q
Thanks Admin

Hopeful
Guest
Hopeful

For ACL2, I am not seeing how to test the other mods, the first part was straightforward permit host 3 deny the others access to the financial server web page. For the others Mod1 says Permit host B from accessing financing server and deny from accessing the other servers (I guess web) but nothing comes up when you try to go to the webpage….I am still able to ping it after entering the commands. I must be missing something.

Travis
Guest
Travis

Hopeful,
Can you list the commands you are using? I’ll take a glance at them for you.

Hopeful
Guest
Hopeful

I am just using the commands I sent last night…I guess I was on the 2019 ver, and not 2020. I reviewed the 2020 a little bit but can’t really see how much different it is…..I test in just a few hours so I am trying to cover other things….I appreciate your willingness to help

aamol
Guest
aamol
Hopeful
Guest
Hopeful

So we will to do the first set of access list and then a mod or just a mod?

aamol
Guest
aamol

its depend which mod you will get..you need to do that only

Hopeful
Guest
Hopeful

I got it….thanks for the video link…i did see her test her acls, but I am not going to worry about it at this point

Daniel
Guest
Daniel

Today i passed the exam with 957 score. Sim > ACL ,ACL2 lab 1 2020 update and EIGRP GRE.
DD > DHCP states
3 questions from 1000q. The rest from 300q.
Thanks to everyone who contributed.
Thanks you ItExamAnswears.net

Travis
Guest
Travis

Congrats Daniel. I appreciate your feedback!

Vesh
Guest
Vesh

Thanks Admin for the effort you put in!! I passed today with 8xx. Most of the questions were from the q300. I got the 2 ACLs and RIPv2 sims. I was revising for 3-4 weeks and i got use to memorizing the questions and answers and even the positions on the multiple choice. On the exam, they rotated them and that threw me off so please ensure you know the answers :). I had 4 DD’s.

Dave
Guest
Dave

Hey guys.

I passed this morning for my exam 200-125 (9XX). The 300 questions are spot on. Thank you for the effort!!!

I had in 65 q in total
ACL1 troubleshoot (4 questions)
ACL 2 configure (different mod) Host B version
DHCP troubleshoot
DD: 3
1: IPV6
2: PPPoe
3: WAN design

Good luck!

Nicholas
Guest
Nicholas

I passed today with score 890. 60 question out of 62 was identical from 300Q. Lab – ACL 1, ACL 2 and EIGRP GRE.. Thank a lot Admin.. This site helped me a lot

naeem
Guest
naeem

Dear sir, kindly update the Cisco- Cyber Security Operations (210-150) Questions as soon as possible, because my voucher will be expired on 5th march 2020. i am waiting your response. i shall be very thankful to you in this regard.

Vicente Herrera
Guest
Vicente Herrera

Hello thank you so much!!! I passed my ccna yesterday this website really helps. I study all 800 questions and lab sim I was done with the entire ccna test in 30 minutes.

cephas
Guest
cephas

Thanks for the good vibes Admin i passed my exam on 21/02/2020 with higher marks, i got 980 thanks once again

ahmad
Guest
ahmad

what is your lab?

Arun
Guest
Arun

Huge Thanks to the Admins of this site and other guys who posted their comments .. today i cleared the exam with 94X score. Sim > ACL1,ACL2 with 4 hosts(different IPs) and EIGRP GRE.
DD > route source ,administrative distance ,metric,timestamp,outbound int..
Few questions were new and few qustn with some changes in topology for multiple choice.But fare enough to clear the exam..

aamol
Guest
aamol

Congrats Arun,For ACL1 and EIGRP GRE all questions were same or different.

Arun
Guest
Arun

questions were same ,only IP add change.

Travis
Guest
Travis

Arun,
Did you have to alter / add the ip address to the serial port connecting the Core?

MAHDI
Guest
MAHDI

Hello guys
How are you?

Will the test period be extended until February 23.??

Travis
Guest
Travis

Mahdi,
February 23rd is the last day before they change the exam.

MAHDI
Guest
MAHDI

Hello Dear.. There is news that the extension will be completed for an additional month But I don’t know, is this true or not?…

Lui
Guest
Lui

i know the extension is true for CCIE certs dont know about ccna

aamol
Guest
aamol

What is the correct answer A or B
Which command should you enter to configure a single port to enter an err-disabled state when it receives an
infenior BPDU?
A. spanning-tree portfast bpduguard
B. spanning-tree guard root
C. spanning-tree portfast default
D. spanning-tree portfast bpdufilter

Hopeful
Guest
Hopeful

I believe it is B. If you look it up guard mentions a single port

aamol
Guest
aamol

Checked but looks A also most dumps has mentioned the same.

Hopeful
Guest
Hopeful

I know, I have seen it. I would spend more time looking , but time is running out. I guess just go with the odds and pick A. Most of the answers seem to be right.

Hopeful
Guest
Hopeful

The root guard feature protects the network against such issues. The configuration of root guard is on a per-port basis. Root guard does not allow the port to become an STP root port, so the port is always STP-designated. If a better BPDU arrives on this port, root guard does not take the BPDU into account and elect a new STP root. Instead, root guard puts the port into the root-inconsistent STP state. You must enable root guard on all ports where the root bridge should not appear. In a way, you can configure a perimeter around the part of… Read more »

Arun
Guest
Arun

fi you a receive a bpdu on portfast interface with bpdu guard enabled – port will go error disabled ..ans is A

Hopeful
Guest
Hopeful

thank you

Elmo037
Guest
Elmo037

BPDU guard and root guard are similar, but their impact is different. BPDU guard disables the port upon BPDU reception if PortFast is enabled on the port. The disablement effectively denies devices behind such ports from participation in STP. You must manually reenable the port that is put into errdisable state or configure errdisable-timeout. Root guard allows the device to participate in STP as long as the device does not try to become the root. If root guard blocks the port, subsequent recovery is automatic. Recovery occurs as soon as the offending device ceases to send superior BPDUs. https://www.cisco.com/c/en/us/support/docs/lan-switching/spanning-tree-protocol/10588-74.html A.… Read more »

vsant89
Guest
vsant89

The correct option is: A

Schmidt
Guest
Schmidt

Hi Guys,

Just recently got home after the exam and I passed 9xx/1000 just using the 300Q. Thanks Admin.
dump is legit

Arun
Guest
Arun

which are the LAB question u got ?

Schmidt
Guest
Schmidt

ACL 1 & 2 and Eigrp same lab as in what we have here

Travis
Guest
Travis

Schmdit
You passed with just the 300@ and no labs completed? Congrats though m8

Schmidt
Guest
Schmidt

lol sorry forgot to mention the labs please pardon me for that 😛

Schmidt
Guest
Schmidt

By the way before I forgot I cross along a question not included in the 300q
it is like Q259 but instead of R4 it uses R1 as reference

aamol
Guest
aamol

Thanks could you let u s know about the DD and for EIGRP the questions were same or different?

Deadprey
Guest
Deadprey

HI admin,

Could you please do the modifications i mentioned a bit lower please?

Jimmy
Guest
Jimmy

I’ ve approved the exam yesterday, I’ve 9xx/810, 95% in the dump, 5% in the old dumps, 1 d/d (Routing table), acl 1 and 2, and eigrp gre…..Dump IT’s valid…..Thanks admin

Hopeful
Guest
Hopeful

when I try acl2 corp1 I am getting configure is locked….can’t even open it up switches open but not router, can’t get to cli and show commands

aamol
Guest
aamol

use PC console

Hopeful
Guest
Hopeful

ty

Travis
Guest
Travis

@hopeful,
If you can get that acl2 lab to work let me know the commands used. I went word for word and didn’t work for me. All pc’s still had URL access to the finance server

Deadprey
Guest
Deadprey

Use the console

Travis
Guest
Travis

@hopeful,
Pretty much any lab that has a pc hooked up (via console) you will use terminal instead of direct CLI access to the router / switch.

Aaron Carpenter
Guest
Aaron Carpenter

I just took my CCNA today. I just want to thank everyone who took the time to write out these questions and labs
to help everyone achieve their CCNA. I really pushed myself to study for this and only had 3 days to go over it. The 300qlite was all you need, but the test is being revised on Feb. 24th. I passed with a 910/1000 score. The test covered Acl-1 and Acl-2 as well as Gre tunneling. Thanks again and for the helpful incites to the exam

Deadprey
Guest
Deadprey

Congratulations Aaron,
Can you please tell me for the labs if the questions were similar or did you have to search for the errors ?

Aaron Carpenter
Guest
Aaron Carpenter

Similar, but ip’s are not the same and you need to know how things work to get through them successfully.

Travis
Guest
Travis

Can someone please explain how the ACL 2 lab simulation will work on the exam? Are we just going to get one MOD to configure or what? I can’t seem to get any response related to this simulation. I’ve got all the labs down pat, but am anxious about this particular lab. Any information would be greatly appreciated.

Daniel
Guest
Daniel

i think you just get one of the mod’s and do your job from there. someone got mod 4, someone mod 1. i got my exam today at 3 pm so if you have it later i can tell you for sure. 🙂

Travis
Guest
Travis

Daniel,
Awesome sir! I take mine at 6:00 pm CST tomorrow. I would greatly appreciate the feedback just to make sure i’m studying correctly, and don’t receive any unwarranted surprises.

HappeeeNewCetificated
Guest
HappeeeNewCetificated

ACL 2 is really easy. You just have to understand which are the requirements to use the rigth addressing. The ACL is just with 3 statements. Try to understand the Lab. If you know how to configure an ACL, you will do it. Don’t forget to apply it in the rigth interface and save the conf.

Travis
Guest
Travis

@happeeeNewCertificated,
Their is a comment below stating that this sties 300q is not valid for the test, is this actually true?

Travis
Guest
Travis

@happeeenewcertificated,
I’ve ran the commands exactly word for word for the ACL2 lab 2020. lab2 section
config#access-list 100 permit tcp host 192.168.33.3 host 172.22.242.23 eq 80
config#access-list 100 deny tcp any host 172.22.242.23 eq 80
config#access-list 100 permit ip any any
config#interface fa0/1 (connnected to the 172.22.242.30 network)
config-if#ip access-group 100 out

After configuring those commands all pc’s can still connect to the finance server via Web URL. Did I do something wrong?

Hopeful
Guest
Hopeful

any luck?

Travis
Guest
Travis

@hopeful,
No I’ve re-done the lab at least a dozen times, not sure how they all still have access via HTTP with an deny ACL.

Hopeful
Guest
Hopeful

hmmmm…..I did get my to block traffic from other pcs….starting to work on mods now…. Corp1>en Password: Corp1#config t Enter configuration commands, one per line. End with CNTL/Z. Corp1(config)#access-list 100 permit tcp host 192.168.33.3 host 172.22.242.23 eq80 ^ % Invalid input detected at ‘^’ marker. Corp1(config)#access-list 100 permit tcp host 192.168.33.3 host 172.22.242.23 eq 80 Corp1(config)#access-list 100 deny tcp any host 172.22.242.23 eq 80 Corp1(config)#access-list 100 permit any any ^ % Invalid input detected at ‘^’ marker. Corp1(config)#access-list 100 permit ip any any Corp1(config)#int fa0/1 Corp1(config-if)#ip access-group 100 out Corp1(config-if)#end Corp1# %SYS-5-CONFIG_I: Configured from console by console Corp1# Corp1# Corp1#copy… Read more »

Travis
Guest
Travis

@hopeful,
hmmm looks exactly like the commands i entered……I’m not sure what the issue is. Do you see a difference in my command sequence?

Travis
Guest
Travis

@hopeful,
I’ve even set this lab up in my home environment that I purchased, and it worked fine on there. I just wasn’t sure if I was messing up somwhere.

Aaron
Guest
Aaron

This is the best example I can show you for Acl-2:
It told to allow host D only web access
No other pcs from the host lan should be allowed to the Financial server
No access from the core to the financial
The host lan and core should have access to the public server.
Corp1(config)#access-list 100 permit tcp host 192.168.240.4 host 172.22.242.23 eq 80
Corp1(config)#access-list 100 deny ip any host 172.22.242.23
Corp1(config)#access-list 100 permit ip any host 172.22.242.17
Corp1(config)#int fa0/1
Corp1(config-if)#ip access-group 100 out
Corp1(config-if)#do copy run start
This was the best example of the lab I had in Acl-2

Travis
Guest
Travis

@hopeful,
Are you using the new ACL lab2 2020 ?

Hopeful
Guest
Hopeful

I think mine is 2019…I downloaded off of the board today

Hopeful
Guest
Hopeful

Do any on your other mods work? I am looking at this thinking we are only going to have to do one, otherwise they will be stepping on each other

Aaron
Guest
Aaron

You need the deny ip any 172.22.243.23 to the second command. If they say no one should be able to access it other than the host. because the second command will only block web traffic. You have to read the questions very carefully.

Buddy
Guest
Buddy

Hi Travis, please share your experience after your exam and Good Luck!!

Travis
Guest
Travis

Buddy,
I sure will don’t you worry.

Daniel
Guest
Daniel

Hey man,
I got the ACL 2 lab 1 from 2020 update.
It is configured you just got to set de ACLs.
Good luck. The 300q are valid.

aamol
Guest
aamol

All the best Daniel,Kindly share the feedback…

notable
Guest
notable

passed today 8xx/1000, labs = ACL/ACL2 and EIGRP GRE. 300q is legit. Good luck!!

Tin
Guest
Tin

Hi,
I have taken my CCNA yesterday. I have passed with 810 + marks. I only studied the 300 q pdf. Most of the questions were from here.
I have practiced labs on 9tut. Didnt take a look in this site because i already had credentials for 9tut.
My labs we 2 ACL’s and EIGRP and GRE.
All the very Best.

Hopeful
Guest
Hopeful

I am looking at the labs for ACL, ACL2, and EIGRP GRE troubleshooting. It looks like with ACL and EGRP GRE with troubleshooting you only need to run the show commands and then answer the questions with them….you don’t have to make configuration changes…is this correct?

Travis
Guest
Travis

Hopeful,
Yes with ACL1 and EIGRP GRE you will only need to use show commands. ACL2 you will have to configure.

Lui
Guest
Lui

That is correct

Red
Guest
Red

Thanks a lot itexamansers.net Admin you are a life saver (RESPECT)
Today I cleared my exam (by score 9xxx). Simulations on my exam ACL-2 ( Instead of of host A it was host-B on my case), ACL( the configuration of access-list 114 and access-list 115 were swapped), EIGRP GRE (as it is ) … Drag and drop number 8 , 1 … most of the questions are from 300Q but i noticed some modification on the the available choice ….
GOOD LUCK GUYS !!!

Travis
Guest
Travis

@red,
so you will use access-list 115 instead of 114 on the one question? Just curious as I take my test tomorrow. and access-list 114 on the serial question?

Red
Guest
Red

@Travis access-list 114 configuration on this site was swapped with access-list 115 on my exam , so my point is, If someone only remember the answers he/she may failed. Try to understand the whole scenario and watch out other similar modifications … The modification affects the answers of #2 and #3 ( If I’m not mistaken the answer of #2 become the answer of # 3 and the answer of #3 become the answer of #2)

Travis
Guest
Travis

@red,
I know the labs in and out. Was just curious in general. It’s more of a thing i’m starting to syke myself out. I appreciate your feedback.

SomeDudeNewCert
Guest
SomeDudeNewCert

Hi all, just passed today, score 938/1000 =)
@Admin CCNA Questions Answers I left a little donation, it’s a fair amount of money in my currency even though in USD doesn’t look so impressive.
The 300q+ dump is solid base for the test, 90%+ of my 62 questions came from that. I also did about 400q + from the 1000q and studied by courseware content available in this website.
Labs were ACL 1, ACL 2 and EIGRP+GRE with a little mod () interfaces
drag drop was DHCP states (initializing, selecting, requesting …)

best of luck to everyone

Mart
Guest
Mart

I passed my exam today. Lots of question was different during exam then on this site are. But i think, this site helps me alot pass exam. I took prepared from this site only. All lab where the same. 2 with ACL and one with EIGRP GRE Troubleshooting. Thanks to all admin team.

aamol
Guest
aamol

So now this 300q are not enough to pass 🙁

Deadprey
Guest
Deadprey

Hi Aamol,
What do you mean by it is not enough?
Didn’t you get the same questions?

Travis
Guest
Travis

Deadprey,
I seriously hope it’s not changed. I have my test tomorrow and this is not music to my ears. I’ve been doing over 7 hours a day studying.

sad
Guest
sad

I’ve commented this before but the comment gets removed. these dumps are NOT AT ALL what is on the exam. beware.

Lui
Guest
Lui

Hthe dumps are valid…the 300 q lite version is spot on…i passed the ccna today with a 938 …got 2 acl and 1 dhcp 4 DD

Travis
Guest
Travis

Lui,
I appreciate it sir/maam. I got highly discouraged Many thanks for the feed back

Lui
Guest
Lui

lol…its sir..

Deadprey
Guest
Deadprey

Can you please tell me what type of questions you get ?

Travis
Guest
Travis

@sad,
how do you explain that people are passing then? Just straight up lieing?

aamol
Guest
aamol

even i am having the same question?? or they are just fooling us.

Aaron
Guest
Aaron

@sad Sounds like you just didn’t study enough and possibly don’t understand the material. These questions were 100% valid before the Feb 24th. turnover date

Deadprey
Guest
Deadprey

Best of luck Travis 👍
Can you please remember the labs and tell us if the questions have changed. And if possible what are the labs you got and if the answers were similar.

Travis
Guest
Travis

@deadprey,
I will for sure remember them and respond tomorrow after I am home. I take it at 6:00 pm CST in the US, not sure where you at. I will let you know was much as I can remember

aamol
Guest
aamol

I was asking the same as Mart mentioned he got different question.I have scheduled mine on 22 and i am preparing from here only.

Buddy
Guest
Buddy

I have mine on 22 as well

Travis
Guest
Travis

@aamoi
I’ll let you know my thoughts / concerns/ labs/ dd etc

Lui
Guest
Lui

It is enough to pass…the answers to the questions are just rearranged in a different order from the dumps and a few new questions are in there….but 95 percent of the questions arefrom the dumps 300 lite…just passed today with a 938…even though i forgot to apply the acl to the interface out on acl2 question…this site is legit

Travis
Guest
Travis

Lui,
Like I said before, I highly appreciate the feed back. do you know by chance the acl2 mod you got? I’ve been having issues doinng that lab, even though i’m doing the commands word for word. I figured just wait to see how they explain the question before proceeding obviously

Lui
Guest
Lui

mod 3 for the ACL2

aamol
Guest
aamol

Thanks Lui….appreciate your valuable feedback on a last moment…big relief..Could you let us know DD and others lab,sim

Lui
Guest
Lui

DD…Pppoe message types, wan types, ipv6, Dhcp

Juse
Guest
Juse

which dd had?

aamol
Guest
aamol

Kinldy help with the correct answer as PDF and VCE both has different answers

Which task should you perform before you use the APIC-EM Path Trace tool to perform ACL analysis?
A. Verify that DNS is configured on the controller
B. Execute a standard traceroute to the destination
C. Verify that the devices of interest are included in the device inventory
D. Configure the IP address from which to generate the trace

Robin Hatton
Guest
Robin Hatton

Hello, I have been wondering this myself and after some digging, I managed to find a youtube video that seems to answer it. I have inked to the exact time he discusses it. https://youtu.be/fV3K-j-pTWk?t=261 Basically that it is important to do a discovery first otherwise the ACL path trace analysis wont know how to trace the path. You run a discovery first using CDP and SNMP which puts the devices in the inventory. Then you run the ACL path trace analysis using what you have in the inventory. That makes me think that it must be C. Someone please correct… Read more »

aamol
Guest
aamol

But to do so firstly need to assign IPs as source and destination so i think it should be D

Thundercat
Guest
Thundercat

Who is on the 21st of February? I’ve scheduled my exam for the 21st. Any advice on what I should focus on. Thanx

Arun
Guest
Arun

Hi , i have scheduled my exam for 21st Feb.. Guys ,please update which LAB question you got it on 20th FEB exam.

Mart
Guest
Mart

I pass tooday.
Labs ACL1,2,EIGRP-GRE

Travis
Guest
Travis

Mart,
When you got the ACL 2 simulation, did you have to configure the initial part, and mod (1-4)? Or do they just have you configure one of the Mod’s(1-4)? I can’t get a response related to this. Thanks.

ninejo
Guest
ninejo

mod1-4 mean a variants of the initial question, so read carefully the question and act the config based on it. The acl2 lab usually is about few steps:
1) write 3 acl rules(global config).
2) apply them to the right interface (outbound) (config-if).
3) save with ”copy running-config startup-config”.
The mod influence only the 3 acl rules, so you have to write them accordingly the initial question. So read carefully before start.

Travis
Guest
Travis

Ninejo,
So are you saying we will have to do the initial ACL configuration + one of the other mods? so 2 sets of (3 lines of commands)? appreciate your feeback

Travis
Guest
Travis

Ninejo,
I just re-read your response. that was exactly what I was asking, if either MOD1/2/3/4 would replace the initial question. I appreciate it sir/maam. I’ve been dieing for response stressing out. Your a legend.

Red
Guest
Red

Passed today (9xx/1000)

Simulations:
1. ACL-2 ( Instead of of host A it was host-B on my case)
2. ACL ( the configuration of access-list 114 and access-list 115 were swapped)
3. EIGRP GRE (as it is )

Drag and drop
1. DD #number 1 and 8 on 300Q
>95% of the question are from the 300Q, but I noticed minor modification on the available choice
Good luck !!!

aamol
Guest
aamol

For Labs ACL1,2,EIGRP-GRE

aamol
Guest
aamol

Could help with correct answers
Which two statements about MPLS are true? (Choose two.)
A. It uses point-to-point physical circuits to provide logical full-mesh connections to the service provider.
B. It requires a hub in a large data center with a fast connection to the service provider.
C. All connections are full mesh with full redundancy.
D. It provides easily scalable bandwidth to support newer connectivity options for numerous remote sites.
E. Because it is a mature technology, it requires less skill to administer.

Hopeful
Guest
Hopeful

A and D It is scalable, and it creates a logical mesh. Just an educated guess at the answer, could not find a lot of support docs….did see a cisco doc that mention scalability and this doc to support logical mesh
https://www.juniper.net/documentation/en_US/junos/topics/concept/mpls-security-layer-2-circuit-understanding.html

Greg
Guest
Greg

Legit Q300 has 90%+ of the questions in my exams. I just finished the exams today with 9xx/1000 score and I had only 3 hours of sleep because of insomia.

Anyway, Q300 is very sufficient. Good luck with the exams it will all change after Feb. 23 so better not fail if you taking the exam before then.