ICND1: 100-105 |
|
1.0 Network Fundamen |
|
|
Lab 1: Configure, Verify, and Troubleshoot IPv4 Addresses |
|
|
Lab 2: Configure, Verify, and Troubleshoot IPv6 Addresses |
|
|
Lab 3: IPv6 Address Autoconfiguration |
|
|
Lab 4: ARP and Proxy ARP |
|
2.0 LAN Switching Fundamentals |
|
|
Lab 5: Configuring Standard VLANs on Catalyst Switches |
|
|
Lab 6: Configuring VTP Clients and Servers on Catalyst Switches |
|
|
Lab 7: Configuring VTP Transparent Mode |
|
|
Lab 8: Securing VTP Domains |
|
|
Lab 9: Configuring Switch Access Port Security |
|
|
Lab 10: Configuring Advanced Switch Access Port Security |
|
|
Lab 11: Configuring Advanced Static Switch Access Port Security |
|
|
Lab 12: Disabling Auto-negotiation of Trunking |
|
|
Lab 13: Setting Switchports to Dynamic |
|
|
Lab 14: Configuring a Default Gateway for Routers and Switches |
|
|
Lab 15: Cisco Discovery Protocol |
|
|
Lab 16: Configuring LLDP |
|
|
Lab 17: Configuring Errdisable Recovery |
|
3.0 Routing Fundamentals |
|
|
Lab 18: Configuring Inter-VLAN Routing (Router on a Stick) |
|
|
Lab 19: Configuring and Allowing Inter-VLAN Routing—SVI |
|
|
Lab 20: Configuring Static Routing via Interfaces |
|
|
Lab 21: Configuring Static Routing via IP addresses |
|
|
Lab 22: Configuring and Naming Static Routes |
|
|
Lab 23: Configuring Default Static Routes |
|
|
Lab 24: Configuring IPv6 Static Routes |
|
|
Lab 25: Configuring IPv6 Default Routes |
|
|
Lab 26: Configuring IP Floating Static Routes |
|
|
Lab 27: Configuring RIP version 2 |
|
|
Lab 28: RIPv2 Automatic Summarization |
|
|
Lab 29: Debugging and Verifying RIP Version 2 Updates |
|
|
Lab 30: Passive Interfaces for RIPv2 Updates |
|
|
Lab 31: RIPv2 Split Horizon |
|
4.0 Infrastructure Services |
|
|
Lab 32: Configuring the Cisco IOS DHCP Server |
|
|
Lab 33: Troubleshooting and Configuring DHCP (Client-Server Router-Based) |
|
|
Lab 34: DHCP Relay |
|
|
Lab 35: Configuring a Router as an NTP Client |
|
|
Lab 36: Configuring and Applying Standard Numbered |
|
|
Lab 37: Configuring and Applying Standard Named ACLs |
|
|
Lab 38: Configuring and Applying Extended Numbered ACLs Inbound |
|
|
Lab 39: Configuring and Applying Extended Named ACLs Inbound |
|
|
Lab 40: Configuring and Applying Extended Numbered ACLs |
|
|
Lab 41: Restricting Inbound Telnet Access Using Extended ACLs |
|
|
Lab 42: Debugging Network Traffic Using Extended ACLs |
|
|
Lab 43: ACL Sequence Numbers |
|
|
Lab 44: Logging ACL Matches |
|
|
Lab 45: Configuring Static Network Address Translation |
|
|
Lab 46: Configuring Dynamic Network Address Translation |
|
|
Lab 47: Configuring Interface-based Port Address Translation |
|
|
Lab 48: Configuring Pool-based Port Address Translation |
|
5.0 Infrastructure Maintenance |
|
|
Lab 49: Configuring Passwords on Catalyst Switches |
|
|
Lab 50: Permitting Telnet Access to Catalyst IOS Switches |
|
|
Lab 51: Permitting Telnet Access to Catalyst IOS Switches—Login Local |
|
|
Lab 52: Permitting Console Access to Catalyst IOS Switches—Login Local |
|
|
Lab 53: Configuring an Enable Secret Password and Exec Timeout on Catalyst Switches |
|
|
Lab 54: Configuring User Privileges on Cisco IOS Devices |
|
|
Lab 55: Configuring Command and Password Privilege Levels on Devices |
|
|
Lab 56: Configuring MOTD Banners |
|
|
Lab 57: Changing the Configuration Register on Cisco IOS Devices |
|
|
Lab 58: Configuring SSH Access/Disable Telnet Access |
|
|
Lab 59: Configuring IOS Device Logging to a SYSLOG Server |
|
|
Lab 60: Performing an IOS Upgrade |
|
|
Lab 61: Performing an IOS Upgrade Using FTP |
|
|
Lab 62: Performing Password Recovery |
ICND1 Challenge Labs |
|
|
Challenge Lab 1: Static Routes and ACLs |
|
|
Challenge Lab 2: Static Routes and ACLs |
|
|
Challenge Lab 3: CDP, Banner Messages, and NTP |
|
|
Challenge Lab 4: Static NAT |
|
|
Challenge Lab 5: NAT Pool |
|
|
Challenge Lab 6: NAT Overload |
|
|
Challenge Lab 7: Static IPv6 Routes |
|
|
Challenge Lab 8: Switchport Security |
|
|
Challenge Lab 9: Trunking and VTP |
|
|
Challenge Lab 10: DHCP, Inter-VLAN Routing, and RIPv2 |
ICND2 200-105 |
|
1.0 LAN Switching Technologies |
|
|
Lab 63: Configuring Extended VLANs on Cisco Catalyst Switches |
|
|
Lab 64: Changing the Native VLAN and Shutting Down Unused Ports |
|
|
Lab 65: Restricting Extended VLANs on Trunks and Changing the VTP Version |
|
|
Lab 66: Verifying Spanning Tree Port States on Catalyst Switches |
|
|
Lab 67: Configuring Spanning Tree Protocol Root Bridges Manually |
|
|
Lab 68: Configuring Spanning Tree Protocol Root Bridges Using the IOS Macro |
|
|
Lab 69: Assigning Multiple Instances to a VLAN Simultaneously |
|
|
Lab 70: Configuring Spanning Tree Protocol for Access Ports (PortFast) |
|
|
Lab 71: Enabling Rapid Per-VLAN Spanning Tree |
|
|
Lab 72: Configure, Verify, and Troubleshoot EtherChannels (Static/PAgP/LACP) |
|
|
Lab 73: Configuring 802.1X Security |
|
|
Lab 74: Configuring DHCP Snooping |
|
2.0 Routing Technologies |
|
|
Lab 75: Configuring OSPF on Point-to-Point Networks |
|
|
Lab 76: Configuring OSPF on Broadcast Networks |
|
|
Lab 77: Configuring the OSPF Router ID Manually |
|
|
Lab 78: Configuring the OSPF Passive Interface Manually |
|
|
Lab 79: Configuring Single-Area OSPFv3 |
|
|
Lab 80: Configuring Multi-Area OSPF |
|
|
Lab 81: Debugging OSPF Adjacencies |
|
|
Lab 82: Configure, Verify, and Troubleshoot Single-Area and Multi-Area OSPFv3 for IPv6 |
|
|
Lab 83: Configuring Basic EIGRP Routing |
|
|
Lab 84: Configuring EIGRP Routing Using Wildcard Masks |
|
|
Lab 85: EIGRP Automatic Summarization |
|
|
Lab 86: Passive Interfaces for EIGRP Updates |
|
|
Lab 87: Summarizing Routes with EIGRP |
|
|
Lab 88: Verifying the EIGRP Database |
|
|
Lab 89: EIGRP Split Horizon |
|
|
Lab 90: Configuring EIGRP for IPv6 |
|
3.0 WAN Technologies |
|
|
Lab 91: Configuring Back-to-Back Serial Connections |
|
|
Lab 92: Verifying Cisco HDLC Encapsulation |
|
|
Lab 93: Configuring PPP Encapsulation |
|
|
Lab 94: PPP Authentication Using PAP |
|
|
Lab 95: PPP Authentication Using CHAP (Method #1) |
|
|
Lab 96: PPP Authentication Using CHAP (Method #2) |
|
|
Lab 97: Configuring Multilink PPP (MLPPP) |
|
|
Lab 98: Configuring PPPoE |
|
|
Lab 99: Configuring eBGP Advanced |
|
|
Lab 100: Configuring GRE Point-To-Point Tunnels |
|
4.0 Infrastructure Services |
|
|
Lab 101: Configuring IPv6 Traffic Filters |
|
|
Lab 102: Implementing HSRP |
|
5.0 Infrastructure Maintenance |
|
|
Lab 103: Configuring IP SLA |
|
|
Lab 104: Configuring SNMPv3 |
|
|
Lab 105: Configuring SNMPv2 |
ICND2 Challenge Labs |
|
|
Challenge Lab 11: CHAP with PAP Fallback |
|
|
Challenge Lab 12: Set STP Root Bridge Manually |
|
|
Challenge Lab 13: Enable RSTP+ |
|
|
Challenge Lab 14: Easy EIGRP |
|
|
Challenge Lab 15: OSPF Passive Interfaces |
|
|
Challenge Lab 16: Multi-Area OSPF |
|
|
Challenge Lab 17: Multi-Area OSPF with Passive Interfaces |
|
|
Challenge Lab 18: OSPFv3 |
|
|
Challenge Lab 19: Multi-Area OSPFv3 |
|
|
Challenge Lab 20: Multi-Area OSPFv3 with PPP and Logging |
Bonus Labs |
|
|
Lab A: Configuring and Applying Extended Named ACLs Outbound |
|
|
Lab B: Restricting Outbound Telnet Access Using Extended ACLs |
|
|
Lab C: Configuring IOS DHCP Clients |
|
|
Lab D: Configuring Command Aliases on IOS Devices |
|
|
Lab E: Configuring Local Name Resolution on Cisco IOS Devices |
|
|
Lab F: Configuring Domain Name Resolution on Cisco IOS Devices |
|
|
Lab G: Configuring Command and Password Privilege Levels on Devices |
|
|
Lab H: Enabling HTTP Access to Cisco IOS Devices |
|
|
Appendix A: Cabling and Configuring a Frame Relay Switch for Two Routers |
|
|
Appendix B: Cabling and Configuring a Frame Relay Switch for Three Routers |
This is absolutely fantastic